Radiator

Three selections are available for your early C4 model Corvette!

Single Row

This radiator is built with a single row of 1.5" tubes. This design increases cooling surfaces by 50% over the stock unit and is an excellent choice for the economy minded customer that wants to eliminate failures from plastic end tanks and gasket leaks. This unit uses the same full size aluminum end tanks as our double row version which increases fluid capacity.

Double Row

Another all-aluminum radiator featuring two rows of 1" tubes and press formed end tanks. This doubles the cooling capacity of the original single row units and eliminates failures due to cracked plastic end tanks and/or gasket leaks. This model is designed for an automatic transmission with an internal cooler built in. To simplify installation, we include the custom mounting cushions. First design AC condensers used on 1984 & early 1985 models will have to be upgraded to allow clearance for the thicker radiator.

LS Swap

The LS engine upgrade features an all-aluminum construction with the same press formed end tanks for longevity and performance. This radiator is a double pass design putting the inlet and outlet on the same side to simplify engine plumbing. The steam port bung is welded into the upper part of the tank for proper ventilation. A sensor port is also included that can be used for a coolant temp fan switch.

Specifications:

	Original Equipment	DeWitts Single Row	PRO Series Two Row	DeWitts LS Swap
Radiator Style:	Single Pass	Single Pass	Single Pass	Multi-Pass
Radiator Flow Direction:	Crossflow	Crossflow	Crossflow	Crossflow
Material Type:	Plastic	Aluminum	Aluminum	Aluminum
Inlet Location:	Upper Drivers Side	Upper Drivers Side	Upper Drivers Side	Upper Passenger Side
Outlet Location:	Lower Passenger Side	Lower Passenger Side	Lower Passenger Side	Lower Passenger Side
Row Quantity:	Single	Single	Double	Double
Cooling Tube Size:	1.00	1.50”	1.00”	1.00”
Core Width:	23.625”	23.50”	23.50”	23.50”
Core Height:	15.00”	16.50”	16.50”	16.50”
Overall Width:	28.00”	28.00”	28.00”	28.00”
Core Thickness:	1.50”	1.50”	2.25”	2.25”
Overall Thickness:	2.00”	3.00”	3.00”	3.00”
Overall Height:	17.00”	17.00”	17.00”	17.00”
Inlet Size:	1.25”	1.25”	1.25”	1.25”
Outlet Size:	1.25”	1.25”	1.25”	1.50”
Cap Included:	No	No	No	No
Finish:	Natural	Natural	Natural or Black	Natural
Internal Transmission Cooler:	Yes	Yes	Yes	Yes
BTU/M Rating:	3545		5151	5151
Low Coolant Sensor Port:	Yes	Yes	Yes	No
Cooler Thread Size:	5/16” Inverted Flare	5/16” Inverted Flare	5/16” Inverted Flare	5/16” Inverted Flare

Fan Upgrade

Model: SP464 (Fan Kit)

Now you can upgrade the factory 1700 cfm with this high performance (1918 cfm) fan. This package comes with a Direct Fit™ adapter plate, ready to bolt on and the best part is, no cutting or splicing wires. We are now supplying this fan with a harness matching plug! Click HERE to order.

Watch an informational video about our fan upgrade below!

Specifications:

	16" SPAL Fan
Blade Diameter:	16.00"
Blade Orientation:	Curved
Overall Width:	16.30"
Overall Height:	16.30"
Fan Thickness:	3.47"
# of Blades:	10
Color:	Black
Material:	Plastic
Push/Pull	Pull

Team Speedway C4

1984-1989 Corvette Direct Fit®